DRIER MACHINE

SZG Series Double Cone Rotary Vacuum Drier

Main Application :
Its mainly used for drying and mixing of material in pharmaceutical chemical and foodstuff trades etc.

Working Principle :
This machine has good drying and mixing effect to heat sensitive, easy oxidizing and non-crystalline damage material, solvent recovering material and strong irritating and toxic material. With high drying speed and uniform product drying, it has no pollution to the material and is operated and cleaned easily, in addition, the optimize designed seal has good sealing effect and convenient maintenance.

Total Volume                : 30 L
Speed                            : 10 r/min
Power                            : 0.8 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 50 L
Speed                            : 10 r/min
Power                            : 0.8 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 100 L
Speed                            : 6.5 r/min
Power                            : 1.1 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 350 L
Speed                            : 6.5 r/min
Power                            : 1.5 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 500 L
Speed                            : 6.5 r/min
Power                            : 1.5 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 750 L
Speed                            : 6.5 r/min
Power                            : 1.5 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 1000 L
Speed                            : 6.5 r/min
Power                            : 3 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 1500 L
Speed                            : 6.5 r/min
Power                            : 3 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 2000 L
Speed                            : 6 r/min
Power                            : 4 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 3000 L
Speed                            : 5 r/min
Power                            : 5.5 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

Total Volume                : 4000 L
Speed                            : 4 r/min
Power                            : 7.5 kw
Loading Coefficeient   : ≤50%
Heating Media              : Steam, hot water
Working Pressure
– Innertank                   : 0.8 – 0.1 Mpa
– Jacket                         : 0.25 – 0.3 Mpa
Working Temperature
– Innertank                    : ≤80℃
– Jacket                          : ≤140℃

GFG Series High Efficiency Fluidized Drier

Main Application :
This machine is used for boiled drying of granulate material with site of 0.16mm, and is applicable for quick drying of wet granulate and powdery material of finished products and intermediate(semi-finished products) in such trades ad pharmacy, foodstuff, light industry and chemical etc.

Working Principle :
Under the draught of fan ,natural air passes through purification cabinet and heater, and form high speed airflow in small hole of material bed board, which makes the material into boiled(fluidized)status and then makes the moisture(or solvent)in material vaporized(or volatilized)quickly, thus realizing the purpose of drying. Stirrer is designed inside hopper, material boiling is free of dead angle, with uniform and quick drying, drying time can be set up freely according to material characteristic, and normally at 10-30min.

Volume of hopper          : 200 L
Production capacity       : 30 – 60 kg/batch
Air-in temperature           :  50-100℃
Fan
– Blast                              : 2576 m³/h
– Air pressure                  : 5639 Pa
– Power                            : 7.5 kw
Stirrer
– Rotary Speed                : 11 r/min
– Motor                             : 0.55 kw
Electric Heating Power   : 54 kw
Steam
– Pressure                        : 0.4 mpa
– Consumption                : 140 kg/h
Compressed Air
– Pressure                         : 0.5 mpa
– Consumption                 : 0.6 m³/h
Weight of Main Machine  : 1000 kg

Volume of hopper          : 300 L
Production capacity       : 50 – 100 kg/batch
Air-in temperature           :  50-100℃
Fan
– Blast                              : 3488 m³/h
– Air pressure                  : 5080 Pa
– Power                            : 11 kw
Stirrer
– Rotary Speed                : 11 r/min
– Motor                             : 0.55 kw
Electric Heating Power   : 63 kw
Steam
– Pressure                        : 0.4 mpa
– Consumption                : 170 kg/h
Compressed Air
– Pressure                         : 0.5 mpa
– Consumption                 : 0.6 m³/h
Weight of Main Machine  : 1200 kg

Volume of hopper          : 400 L
Production capacity       : 60 – 120 kg/batch
Air-in temperature           :  50-100℃
Fan
– Blast                              : 3619 m³/h
– Air pressure                  : 7109 Pa
– Power                            : 15 kw
Stirrer
– Rotary Speed                : 11 r/min
– Motor                             : 0.55 kw
Electric Heating Power   : 63 kw
Steam
– Pressure                        : 0.4 mpa
– Consumption                : 210 kg/h
Compressed Air
– Pressure                         : 0.5 mpa
– Consumption                 : 0.6 m³/h
Weight of Main Machine  : 1450 kg

Volume of hopper          : 500 L
Production capacity       : 70 – 150 kg/batch
Air-in temperature           :  50-100℃
Fan
– Blast                              : 5114 m³/h
– Air pressure                  : 5869 Pa
– Power                            : 10.5 kw
Stirrer
– Rotary Speed                : 11 r/min
– Motor                             : 0.75 kw
Electric Heating Power   : 72 kw
Steam
– Pressure                        : 0.4 mpa
– Consumption                : 240 kg/h
Compressed Air
– Pressure                         : 0.5 mpa
– Consumption                 : 0.9 m³/h
Weight of Main Machine  : 1500 kg

Volume of hopper          : 650 L
Production capacity       : 100 – 200 kg/batch
Air-in temperature           :  50-100℃
Fan
– Blast                              : 6032 m³/h
– Air pressure                  : 7610 Pa
– Power                            : 22 kw
Stirrer
– Rotary Speed                : 11 r/min
– Motor                             : 0.75 kw
Electric Heating Power   : 81 kw
Steam
– Pressure                        : 0.6 mpa
– Consumption                : 280 kg/h
Compressed Air
– Pressure                         : 0.5 mpa
– Consumption                 : 0.9 m³/h
Weight of Main Machine  : 1700 kg

DW Series Mesh-Belt Drier

Main Application :
The machine is suitable for drying the material in pharmaceutical chemical foodstuff, elastic gum, electronical industries dewatering vegetable, particle feed, gourmet powder, shredded coconut stuffing, organic color, compound rubber, acryl fibre, medicine product, medicine material , small wooden product, plastic product, aging and solidification for the electronic component and device.

Working Principle :
The materials are uniformly put on the mesh-belt by the material charger. The mesh-belt uses generally 12-60mesh stainless steel wire net and it is drawn and moved inside the direr by a transmission device. The drier is composed of several units, the hot air is circulated separately.Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve.The hot air passes through the meshbelt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring will fall into the material collector continuously. The top nand low circulation units can freely equipped according to the users demand. The unit can be selected according to be demand.

Features :
This machine is flowing and continuous type drying equipment firstly made by our factory. The machine is used for drying the piece, tape and particle state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of traditional Chinese medicine and others, for which the water content rate is high and the high temperature is not allowed . The machine owns the advantages, that its drying speed is fast,the evaporation strength is high and the product quality is good . The dewatering filtering cake state paste material, after the particle makeing or bar making, can be dried also.

Unit Number                    : 4
Belt Width                         : 1.2 m
Drying Section Length    : 8 mm
Thickness of The             : 10 – 80 mm
Material To Be Covered
Temperature                     : 60 – 130℃
Steam Pressure               : 0.2 – 0.8 Mpa
Steam Consumption       : 120 – 300 kg/h
Drying Time                      : 0.2 – 1.2 h
Drying Strength                : 60 – 160 kg H20/h
Total Power of                  : 9.9 kw
The Blower
Total Power of                  : 11.4 kw
The Equipment

Unit Number                    : 5
Belt Width                         : 1.2 m
Drying Section Length    : 10 mm
Thickness of The             : 10 – 80 mm
Material To Be Covered
Temperature                     : 60 – 130℃
Steam Pressure               : 0.2 – 0.8 Mpa
Steam Consumption       : 150 – 375 kg/h
Drying Time                      : 0.25 – 1.5 h
Drying Strength                : 80 – 220 kg H20/h
Total Power of                  : 12.1 kw
The Blower
Total Power of                  : 13.6 kw
The Equipment

Unit Number                    : 6
Belt Width                         : 1.6 m
Drying Section Length    : 8 mm
Thickness of The             : 10 – 80 mm
Material To Be Covered
Temperature                     : 60 – 130℃
Steam Pressure               : 0.2 – 0.8 Mpa
Steam Consumption       : 150 – 375 kg/h
Drying Time                      : 0.2 – 1.2 h
Drying Strength                : 75 – 220 kg H20/h
Total Power of                  : 9.9 kw
The Blower
Total Power of                  : 11.4 kw
The Equipment

Unit Number                    : 5
Belt Width                         : 1.6 m
Drying Section Length    : 10 mm
Thickness of The             : 10 – 80 mm
Material To Be Covered
Temperature                     : 60 – 130℃
Steam Pressure               : 0.2 – 0.8 Mpa
Steam Consumption       : 170 – 740 kg/h
Drying Time                      : 0.25 – 1.5 h
Drying Strength                : 95 – 250 kg H20/h
Total Power of                  : 12.1 kw
The Blower
Total Power of                  : 13.6 kw
The Equipment

Unit Number                    : 4
Belt Width                         : 2 m
Drying Section Length    : 8 mm
Thickness of The             : 10 – 80 mm
Material To Be Covered
Temperature                     : 60 – 130℃
Steam Pressure               : 0.2 – 0.8 Mpa
Steam Consumption       : 180 – 500 kg/h
Drying Time                      : 0.2 – 1.2 h
Drying Strength                : 100 – 260 kg H20/h
Total Power of                  : 18.2 kw
The Blower
Total Power of                  : 19.7 kw
The Equipment

Unit Number                    : 5
Belt Width                         : 2 m
Drying Section Length    : 10 mm
Thickness of The             : 10 – 80 mm
Material To Be Covered
Temperature                     : 60 – 130℃
Steam Pressure               : 0.2 – 0.8 Mpa
Steam Consumption       : 225 – 600 kg/h
Drying Time                      : 0.25 – 1.5 h
Drying Strength                : 120 – 300 kg H20/h
Total Power of                  : 22.2 kw
The Blower
Total Power of                  : 23.7 kw
The Equipment

RXH Series Hot Air Circulating Drier

Main Application :
It’s applied for drying and dehumidification of material in such trades as pharmaceutical, chemical foodstuff, light industry, heavy industry etc., as well as heating and dehumidification of product, including raw medicines, original medicines, doses, traditional Chinese medicine tablet, powder, granulate, electuary, ball packing bottle, pigment, dyestuff, dried vegetable, food, plastic resin, electric clement and baking finish etc.

Drying Capacity            : 60 kg
Power                             : 0.45 kw
Steam Consumption    : 10 kg/h
Radiation Area               : 5 m
Blast                                : 3450 mh
Temperature Deviation : ±2℃
Baking Disc                    : 24
Baking Cart                    : 1
Overall Dimension         : 1400x1200x2300 mm

Drying Capacity            : 120 kg
Power                             : 0.45 kw
Steam Consumption    : 20 kg/h
Radiation Area               : 20 m
Blast                                : 3450 mh
Temperature Deviation : ±2℃
Baking Disc                    : 48
Baking Cart                    : 2
Overall Dimension         : 2300x1200x2300 mm

Drying Capacity            : 240 kg
Power                             : 0.9 kw
Steam Consumption    : 45 kg/h
Radiation Area               : 40 m
Blast                                : 6900 mh
Temperature Deviation : ±2℃
Baking Disc                    : 96
Baking Cart                    : 4
Overall Dimension         : 2300x2200x2300 mm

Drying Capacity            : 360 kg
Power                             : 1.35 kw
Steam Consumption    : 71 kg/h
Radiation Area               : 80 m
Blast                                : 10350 mh
Temperature Deviation : ±2℃
Baking Disc                    : 144
Baking Cart                    : 6
Overall Dimension         : 2300x2200x2300 mm

: 360 kg
: 1.35 kw
: 71 kg/h
: 80 m
: 10350 mh
: ±2℃
: 144
: 6
: 2300x2200x2300 mm

Drying Capacity            :480 kg
Power                             : 1.8 kw
Steam Consumption    : 90 kg/h
Radiation Area               : 100 m
Blast                                : 13800 mh
Temperature Deviation : ±2℃
Baking Disc                    : 192
Baking Cart                    : 8
Overall Dimension         : 4460x3200x2000 mm

FL Series Fluidized Granulating Drier

Main Application :
Pharmaceutical industry: tablet, capsule, low sugar or no sugar granule of Chinese medicine Foodstuff: cocoa, coffee, milk powder, juice of granulate, flavoring and so on. Other industries: pesticide, feed, chemical fertilizer, pigment, dyestuff and so on. Pharmaceutical industry: tablet.

Working Principle :
The powder granule the container (fluidization bed) appear the state of fluidization, It is preheated and mixed with clean and heated air. At the same time the solution of adhesive solvent is fogged and sprayed into the container. It makes the some particles become granulating that contains adhesive. Being of unceasing dry through hot air, the moisture in the granulating is evaporated and the adhesive is solidification. The process is carried out continuously. Finally it forms ideal, uniform and porous granules.

Features :

  • Because of powder Granulating, the flow property is improved and the dust is reduced.
  • Because of powder Granulating, its solving property is improved.
  • The mixing, Granulating and drying can be completed in one step inside the machine.
  • The operation of equipment is safe because the antistatic filtering cloth is adapted.
  • The operation personnel can not be damaged if explosion is taken place because there is releasing hole.
  • The equipment has no dead corner. Therefore the loading and unloading are quick and light and clean. It can meet the requirements of GMP.

Container Volume      : 12 L
Container Diameter    : 300 mm
Min. Capability            : 1.5 kg
Max. Capability           : 4.5 kg
Fan Capacity               : 1000 m³/h
Fan Pressure               : 375 mm H2O
Fan Power                   : 3 kw
Steam Expenditure    : 15 kg/h
Com. Air                       : 0.9 m3/min
Expenditure
Steam Pressure          : 0.3 – 0.6 mpa
Temperature                : Adjustable at the range from room temperature to 120℃
Working Time              : Accordance with the properties of raw materials
Field                               : ≥99%
Noise                             : When installation,main machine is separated from fan
Size                                : 1.0×0.6×2.1 mm
Weight of The Main    : 500 kg
Body

Container Volume      : 22 L
Container Diameter    : 400 mm
Min. Capability            : 4 kg
Max. Capability           : 6 kg
Fan Capacity               : 1200 m³/h
Fan Pressure               : 375 mm H2O
Fan Power                   : 4 kw
Steam Expenditure    : 23 kg/h
Com. Air                       : 0.9 m3/min
Expenditure
Steam Pressure          : 0.3 – 0.6 mpa
Temperature                : Adjustable at the range from room temperature to 120℃
Working Time              : Accordance with the properties of raw materials
Field                               : ≥99%
Noise                             : When installation,main machine is separated from fan
Size                                : 1.2×0.7×2.3 mm
Weight of The Main    : 700 kg
Body

Container Volume      : 45 L
Container Diameter    : 550 mm
Min. Capability            : 10 kg
Max. Capability           : 20 kg
Fan Capacity               : 1400 m³/h
Fan Pressure               : 480 mm H2O
Fan Power                   : 5.5 kw
Steam Expenditure    : 42 kg/h
Com. Air                       : 0.9 m3/min
Expenditure
Steam Pressure          : 0.3 – 0.6 mpa
Temperature                : Adjustable at the range from room temperature to 120℃
Working Time              : Accordance with the properties of raw materials
Field                               : ≥99%
Noise                             : When installation,main machine is separated from fan
Size                                : 1.25×0.9×2.5 mm
Weight of The Main    : 900 kg
Body

: 45 L
: 550 mm
: 10 kg
: 20 kg
: 1400 m³/h
: 480 mm H2O
: 5.5 kw
: 42 kg/h
: 0.9 m3/min
: 0.3 – 0.6 mpa
: Adjustable at the range from room temperature to 120℃
: Accordance with the properties of raw materials
: ≥99%
: When installation,main machine is separated from fan
: 1.25×0.9×2.5 mm
: 900kg

Container Volume      : 100 L
Container Diameter    : 700 mm
Min. Capability            : 15 kg
Max. Capability           : 45 kg
Fan Capacity               : 1800 m³/h
Fan Pressure               : 480 mm H2O
Fan Power                   : 7.5 kw
Steam Expenditure    : 70 kg/h
Com. Air                       : 0.9 m3/min
Expenditure
Steam Pressure          : 0.3 – 0.6 mpa
Temperature                : Adjustable at the range from room temperature to 120℃
Working Time              : Accordance with the properties of raw materials
Field                               : ≥99%
Noise                             : When installation,main machine is separated from fan
Size                                : 1.60×1.1×2.5 mm
Weight of The Main    : 1000 kg
Body

Container Volume      : 220 L
Container Diameter    : 1000 mm
Min. Capability            : 30 kg
Max. Capability           : 90 kg
Fan Capacity               : 3000 m³/h
Fan Pressure               : 950 mm H2O
Fan Power                   : 11 kw
Steam Expenditure    : 141 kg/h
Com. Air                       : 1 m3/min
Expenditure
Steam Pressure          : 0.3 – 0.6 mpa
Temperature                : Adjustable at the range from room temperature to 120℃
Working Time              : Accordance with the properties of raw materials
Field                               : ≥99%
Noise                             : When installation,main machine is separated from fan
Size                                : 1.85×1.4×3 mm
Weight of The Main    : 1100 kg
Body

Container Volume      : 220 L
Container Diameter    : 1000 mm
Min. Capability            : 30 kg
Max. Capability           : 90 kg
Fan Capacity               : 3000 m³/h
Fan Pressure               : 950 mm H2O
Fan Power                   : 11 kw
Steam Expenditure    : 141 kg/h
Com. Air                       : 1 m3/min
Expenditure
Steam Pressure          : 0.3 – 0.6 mpa
Temperature                : Adjustable at the range from room temperature to 120℃
Working Time              : Accordance with the properties of raw materials
Field                               : ≥99%
Noise                             : When installation,main machine is separated from fan
Size                                : 1.85×1.4×3 mm
Weight of The Main    : 1100 kg
Body

Container Volume      : 420 L
Container Diameter    : 1200 mm
Min. Capability            : 80 kg
Max. Capability           : 160 kg
Fan Capacity               : 4500 m³/h
Fan Pressure               : 950 mm H2O
Fan Power                   : 18.5 kw
Steam Expenditure    : 211 kg/h
Com. Air                       : 1.1 m3/min
Expenditure
Steam Pressure          : 0.3 – 0.6 mpa
Temperature                : Adjustable at the range from room temperature to 120℃
Working Time              : Accordance with the properties of raw materials
Field                               : ≥99%
Noise                             : When installation,main machine is separated from fan
Size                                : 2.2×1.65×3.3 mm
Weight of The Main    : 1500 kg
Body

Container Volume      : 1000 L
Container Diameter    : 1600 mm
Min. Capability            : 150 kg
Max. Capability           : 450 kg
Fan Capacity               : 7000 m³/h
Fan Pressure               : 950 mm H2O
Fan Power                   : 30 kw
Steam Expenditure    : 366 kg/h
Com. Air                       : 1.5 m3/min
Expenditure
Steam Pressure          : 0.3 – 0.6 mpa
Temperature                : Adjustable at the range from room temperature to 120℃
Working Time              : Accordance with the properties of raw materials
Field                               : ≥99%
Noise                             : When installation,main machine is separated from fan
Size                                : 2.8×2.0x4.0 mm
Weight of The Main    : 1800 kg
Body

FZG, YZG Series Square and Round Static Vacuum Drier

General Description :

Vacuum dry is to let the raw material to be dried at vacuum condition heating and drying. It used vacuum pump to pump damp and make the working chamber form vacuum status. Therefore the dry speed pf raw material is quickened and the energy is saved greatly.
Vacuum dry is divided into static and dynamic drier. Model FZG round vacuum drier or Model FZG square vacuum drier belongs to static drier. Model SZG double cone rotating vacuum drier belongs to dynamic drier. When raw material is dried in static drier, raw material is in static state and its shape can not destroy.
Before drying, it can carry out the treatment of disinfection. When raw material is dried in dynamic drier, raw material is turned over ceaselessly. So it can be dried better and more uniformly.
In the state of vacuum, the boiling point of raw material will be dropped. Therefore it is suitable for drying raw materials that are unstable or thermal sensitive. The vacuum drier also has good air-tightness. So it is also suitable for drying raw materials that contain strong irritative and toxic gases and the solvent needs to recover.
The vacuum drier has been wide used for pharmaceutical industry, chemical industry, foodstuff industry, dyestuff industry and so on. Air is in conformity with the requirements of GMP.

Inner size of drying chamber
Outer size of drying chamber
Layers of baking support
Interval
Size of Baking Tray
Quantity of Taking
Working Pressure Inside The Pipe of Baking Support
Operation Temperature of Baking Support
Degree of Vacuum Inside The Chamber When Operation Indle
Under The Condition of-0.1Mpa and 110, Evaporation Rate of Wate
When Condensor is Used, Model
When Condensor is Used Power of Vacuum Pump
When Condensor is Notused, Model
When Condensor is Notused Power of Vacuum Pump
Weight of Drying Chamber

: φ600X976 mm
: 1135x810x1020 mm
: 4
: 81 mm
: 310x600x45 mm
: 4
: ≤0.784 Mpa
: 35 – 150℃
: —0.1 Pa
.
: 7.2 kg/㎡.hr
.
: 2X-15A
: 2 kw
: SZ-0.5
: 1.5 kw
: 250 kg

Inner size of drying chamber
Outer size of drying chamber
Layers of baking support
Interval
Size of Baking Tray
Quantity of Taking
Working Pressure Inside The Pipe of Baking Support
Operation Temperature of Baking Support
Degree of Vacuum Inside The Chamber When Operation Indle
Under The Condition of-0.1Mpa and 110, Evaporation Rate of Wate
When Condensor is Used, Model
When Condensor is Used Power of Vacuum Pump
When Condensor is Notused, Model
When Condensor is Notused Power of Vacuum Pump
Weight of Drying Chamber

: φ800×1247 mm
: 1700x1045x1335 mm
: 4
: 82 mm
: 520x410x45 mm
: 8
: ≤0.784 Mpa
: 35 – 150℃
: —0.1Pa
.
: 7.2 kg/㎡.hr
.
: 2X-30A
: 3 kw
: SZ-1
: 2.2 kw
: 600 kg

Inner size of drying chamber
Outer size of drying chamber
Layers of baking support
Interval
Size of Baking Tray
Quantity of Taking
Working Pressure Inside The Pipe of Baking Support
Operation Temperature of Baking Support
Degree of Vacuum Inside The Chamber When Operation Indle
Under The Condition of-0.1Mpa and 110, Evaporation Rate of Wate
When Condensor is Used, Model
When Condensor is Used Power of Vacuum Pump
When Condensor is Notused, Model
When Condensor is Notused Power of Vacuum Pump
Weight of Drying Chamber

: φ1000×1527 mm
: 1693x1190x1500 mm
: 6
: 102 mm
: 520x410x45 mm
: 12
: ≤0.784 Mpa
: 35 – 150℃
: —0.1 Pa
.
: 7.2 kg/㎡.hr
.
: 2X-30A
: 3 kw
: SZ-1
: 2.2 kw
: 800 kg

Inner size of drying chamber
Outer size of drying chamber
Layers of baking support
Interval
Size of Baking Tray
Quantity of Taking
Working Pressure Inside The Pipe of Baking Support
Operation Temperature of Baking Support
Degree of Vacuum Inside The Chamber When Operation Indle
Under The Condition of-0.1Mpa and 110, Evaporation Rate of Wate
When Condensor is Used, Model
When Condensor is Used Power of Vacuum Pump
When Condensor is Notused, Model
When Condensor is Notused Power of Vacuum Pump
Weight of Drying Chamber

: φ1400×2054 mm
: 2380x1675x1920 mm
: 8
: 102 mm
: 460x640x45 mm
: 32
: ≤0.784 Mpa
: 35 – 150℃
: —0.1 Pa
.
: 7.2 kg/㎡.hr
.
: 2X-70A
: 5.5 kw
: SZ-2
: 4 kw
: 1400 kg

LPG Series High-Speed Centrifuge Atomizing Drier

Main Application :
LPG series high-speed centrifuge atomizing drier is a special equipment and is suitable for drying emulsion, suspending liquid, liquor and so on. Particularly it has unique advantage for drying polymers and resins; dyestuff and pigment; ceramics, glass; derust agent; pesticide; carbohydrate, dairy products; detergent and surfactant; fertilizer, organic compound, inorganic compound and so on.

Working Principle :
Air is turned into hot air through air filter and heater into hot air distributor at the top of dry chamber and then enters into dry chamber spirally and evenly, At the sametime liquid of raw material is sent to centrifugally tomizer at the top of dry chamber pumped by pump through filter, In which liquid of raw material atomizes ting droplets. Air and liquid of raw material flows and contacts each other fully. The moisture vaporizes rapidly. Liquid of raw material is dried into finished product in a short time. Tile finished product is discharged through cyclone separator at the bottom of drier. The wasted air is exhausted through fan.

Features :

  • Its dry speed is very quick. In general, it needs 5~15 seconds. It has feature of momentary dry.
  • Because raw material can be dried momentarily. Especially, it is suitable for drying thermal sensitive raw materials. It can maintain color, smell and smell of raw material.
  • Its operation is stable and simple. Its regulation and control is very convenient. It is easy to realize continuous operation.
  • The distribution, fluidity and solubility of product are good.

Inlet Temperature
Outlet Temperature
Max Evaporated Amount of Moisture
Drving From of Centrifugal Nozzle
Revolution
Diameter of Atomizing Disk
Heat Source
Max. Power of Electric Heater
Overall Dimension
Recovery Rate of Dry Powder

: Automatic control 140~350℃
: 80-90℃
: 5 kg/h
: Compressed airdrive
: 25000 rpm
: 50 mm
: Electricity
: 9 kw
: 1.8×9.3×2.2 mm
: ≧95%

Inlet Temperature
Outlet Temperature
Max Evaporated Amount of Moisture
Drving From of Centrifugal Nozzle
Revolution
Diameter of Atomizing Disk
Heat Source
Max. Power of Electric Heater
Overall Dimension
Recovery Rate of Dry Powder

: Automatic control 140~350℃
: 80 – 90℃
: 25 kg/h
: Mechanical drive
: 18000 rpm
: 120 mm
: Steam + Electricity, Oilfuel, Hotairfurnace
: 36 kw
: 3×2.7×4.26 mm
: ≧95%

Inlet Temperature
Outlet Temperature
Max Evaporated Amount of Moisture
Drving From of Centrifugal Nozzle
Revolution
Diameter of Atomizing Disk
Heat Source
Max. Power of Electric Heater
Overall Dimension
Recovery Rate of Dry Powder

: Automatic control 140~350℃
: 80 – 90℃
: 50 kg/h
: Mechanical drive
: 18000 rpm
: 120 mm
: Steam + Electricity, Oilfuel, Hotairfurnace
: 72 kw
: 3.5×3.5×4.8 mm
: ≧95%

Inlet Temperature
Outlet Temperature
Max Evaporated Amount of Moisture
Drving From of Centrifugal Nozzle
Revolution
Diameter of Atomizing Disk
Heat Source
Max. Power of Electric Heater
Overall Dimension
Recovery Rate of Dry Powder

: Automatic control 140~350℃
: 80-90℃
: 150 kg/h
: Mechanical drive
: 15000 rpm
: 150 mm
: Steam + Electricity, Oilfuel, Hotairfurnace
: 99 kw
: 5.5x4x7 mm
: ≧95%

© 2017 Medi City. All rights reserved.

Click Me